danielesindaco
Junior Member
- Joined
- Apr 2, 2015
- Messages
- 17
- Reaction score
- 4
Hi there,
I am an new member.
I was wondering if some of you with S100 experience/knowledge can help me with the following:
-neck width at nut
-neck profile
-neck/body joint angle
I am looking for a S100 made in USA. I understood that neck specs changed thru the years of the guitar production (e.g. neck width 1" 5/8 or 1" 11/16, slim- or chunkier neck profiles, no/yes neck tilt angle).
I would like to find one having the wider neck (1 11/16), chunkier neck and with the neck mounted on a angle to the body (tilted, not flat).
It is not clear to me if I should go for 70's or the 1994-2000 reissues...
Hope you guys can help. I am aware of Qvart thread but as we know all those links are broken unfortunately and I did not manage to find those info.
PS I recently got a MIK (Cordoba) S100 from a local distributor to try. I played it extensively on tour. I can help on that matter if anybody is interested.
Already thanks for your replies.
Dani
I am an new member.
I was wondering if some of you with S100 experience/knowledge can help me with the following:
-neck width at nut
-neck profile
-neck/body joint angle
I am looking for a S100 made in USA. I understood that neck specs changed thru the years of the guitar production (e.g. neck width 1" 5/8 or 1" 11/16, slim- or chunkier neck profiles, no/yes neck tilt angle).
I would like to find one having the wider neck (1 11/16), chunkier neck and with the neck mounted on a angle to the body (tilted, not flat).
It is not clear to me if I should go for 70's or the 1994-2000 reissues...
Hope you guys can help. I am aware of Qvart thread but as we know all those links are broken unfortunately and I did not manage to find those info.
PS I recently got a MIK (Cordoba) S100 from a local distributor to try. I played it extensively on tour. I can help on that matter if anybody is interested.
Already thanks for your replies.
Dani