You can also check with the Guitar Mechanic. He may have replacements.While setting up my s-300, one of the screws in the bridge snapped. Does anyone know the size so I can replace it? I’d hate to guess at it and end up cross threading/galling the hole.
You can also check with the Guitar Mechanic. He may have replacements.
I have a few Guild solid bodies from the late 70's to early 80's and have been keeping my eye out for this type of hardware just in case. Here is an ebay listing for a set of screws, roller saddles and springs. I purchased a set from this seller a month ago.
As mentioned the Guitar Mechanic will have a lot of good info but does not always have inventory. His website has a great explanation of the three versions of Guild bridges with photos.
https://www.ebay.com/itm/Goeldo-HWG...Framus-Reel-Ridge-Nickel-6-Piece/323987659004
Good luck,
I've seen his listing before too, and I may be in for a set too to refresh the bridge on my M-75 Bluesbird. I need to make sure they match the correct version of the Muller I have.I have a few Guild solid bodies from the late 70's to early 80's and have been keeping my eye out for this type of hardware just in case. Here is an ebay listing for a set of screws, roller saddles and springs. I purchased a set from this seller a month ago.
As mentioned the Guitar Mechanic will have a lot of good info but does not always have inventory. His website has a great explanation of the three versions of Guild bridges with photos.
https://www.ebay.com/itm/Goeldo-HWG...Framus-Reel-Ridge-Nickel-6-Piece/323987659004
Good luck,