Horrid the Terrible
Junior Member
- Joined
- Jul 29, 2023
- Messages
- 23
- Reaction score
- 11
- Guild Total
- 1
Not wanting to hijack the electronics thread any further so I'll start this one. My Starfire 1SC has developed a rattling noise in the bridge. Probably due to loose manufacturing tolerances some saddle screws are quite literally loose as they shake, rattle and roll. (See what I did there, )
Back on point. I'm having a difficult time trying to find roller bridges, or any bridge that fit these specs. Any help would be appreciated greatly.
Fret board radius- 12.5"
String spacing 52mm
Post (center) spacing 73.5mm
Bolt width 7.6mm
Bolt length 31.5mm
Measured using digital calipers of questionable, but normally accurate quality.
Back on point. I'm having a difficult time trying to find roller bridges, or any bridge that fit these specs. Any help would be appreciated greatly.
Fret board radius- 12.5"
String spacing 52mm
Post (center) spacing 73.5mm
Bolt width 7.6mm
Bolt length 31.5mm
Measured using digital calipers of questionable, but normally accurate quality.