WTB Bushing for tuning post for a 1971 S-100

[FrankMcG]

Hello folks,
Trying to track down a replacement bushing that goes around the tuning post on what I believe is a Grover machine head on this 1971 s-100. I reached out to Grover and they recommended this forum. Thanks in advance for any help you may be able to give.

 

[AcornHouse]

Where are you located? Most luthiers should have a drawerful of random bushings from guitars they’ve worked on over the years.

 

[GAD]

Moving to WTB forum

 

[hansmoust]

Hello folks,
Trying to track down a replacement bushing that goes around the tuning post on what I believe is a Grover machine head on this 1971 s-100.

Hello FrankMcG,

Welcome! As Chris already pointed out, there are probably many guitar repairmen that may have the item that you're looking for.
However, there are many different versions that, at first sight, may look alike, but that may not fit your guitar.

From what I've researched I would think that you need the following bushing, but I may be wrong.

Maybe you could wiggle out one of the other bushings, so you can compare the 'knurled' part with the one in the photo.
The diameter of the part that goes into the hole is approximately 11/32".
If you measure something else, just let me know and I will check my drawers.

I can help you out with one of these, but if you can find one a little closer to where you are, I'm in the Netherlands, it might be a little easier.

Sincerely,

Hans Moust
www.guitarsgalore.nl

 

[FrankMcG]

Where are you located? Most luthiers should have a drawerful of random bushings from guitars they’ve worked on over the years.

Charleston SC

 

[FrankMcG]

Moving to WTB forum

Do you think that forum will be more responsive and better suited for this search?

 

[FrankMcG]

Do you think that forum will be more responsive and better suited for this search?

Haha I just realized it was already there...sorry

 

[AcornHouse]

Charleston SC

A quick Google search for “Charleston SC luthier” reveals a number of options. I’m sure if you give them a call to see if they might have something you’ll find the right bushing without too much trouble. Much easier to match if they can see the guitar in person.

 

[FrankMcG]

Hello FrankMcG,

Welcome! As Chris already pointed out, there are probably many guitar repairmen that may have the item that you're looking for.
However, there are many different versions that, at first sight, may look alike, but that may not fit your guitar.

From what I've researched I would think that you need the following bushing, but I may be wrong.

Maybe you could wiggle out one of the other bushings, so you can compare the 'knurled' part with the one in the photo.
The diameter of the part that goes into the hole is approximately 11/32".
If you measure something else, just let me know and I will check my drawers.

I can help you out with one of these, but if you can find one a little closer to where you are, I'm in the Netherlands, it might be a little easier.

Sincerely,

Hans Moust
www.guitarsgalore.nl

The photos attached show the bottom of the bushing measurement and the other one is for the top as you would surmise...do you need the post's diameter? i think it is just under 1/4" or about 6mm. I hope these pics help.

 

[FrankMcG]

A quick Google search for “Charleston SC luthier” reveals a number of options. I’m sure if you give them a call to see if they might have something you’ll find the right bushing without too much trouble. Much easier to match if they can see the guitar in person.

good call thanks!

 

[beecee]

If you do strike out locally Hans shipped me the bushing that went missing on my F-212

 

[Wilmywood]

I've found replacement bushings for a guitar here at Stewmac. The listings include all dimensions.

Tuner Parts - StewMac

Shop Guitar Tuner Parts at StewMac. 100% satisfaction guaranteed. Order today with StewMAX FREE Shipping!

www.stewmac.com

 

[FrankMcG]

Hello FrankMcG,

Welcome! As Chris already pointed out, there are probably many guitar repairmen that may have the item that you're looking for.
However, there are many different versions that, at first sight, may look alike, but that may not fit your guitar.

From what I've researched I would think that you need the following bushing, but I may be wrong.

Maybe you could wiggle out one of the other bushings, so you can compare the 'knurled' part with the one in the photo.
The diameter of the part that goes into the hole is approximately 11/32".
If you measure something else, just let me know and I will check my drawers.

I can help you out with one of these, but if you can find one a little closer to where you are, I'm in the Netherlands, it might be a little easier.

Sincerely,

Hans Moust
www.guitarsgalore.nl

Hans I have tried a local luthiers and no luck. Stewmac doesn't have the tapered ones in stock. Can you give me a price on these bushings pictured above they seem to be the correct ones. I can give you my address for shipping to get an estimate. I would like two of them if you have them.
Thanks again

 

[GuildFS4612CE]

You might want to contact Hans on his website...the link is in his post above.

 

[FrankMcG]

I've found replacement bushings for a guitar here at Stewmac. The listings include all dimensions.

Tuner Parts - StewMac

Shop Guitar Tuner Parts at StewMac. 100% satisfaction guaranteed. Order today with StewMAX FREE Shipping!

www.stewmac.com

thanks of course the tapered ones are on back order

The photos attached show the bottom of the bushing measurement and the other one is for the top as you would surmise...do you need the post's diameter? i think it is just under 1/4" or about 6mm. I hope these pics help.

The photos attached show the bottom of the bushing measurement and the other one is for the top as you would surmise...do you need the post's diameter? i think it is just under 1/4" or about 6mm. I hope these pics help.

The photos attached show the bottom of the bushing measurement and the other one is for the top as you would surmise...do you need the post's diameter? i think it is just under 1/4" or about 6mm. I hope these pics help.

If you do strike out locally Hans shipped me the bushing that went missing on my F-212

thanks I have reached out to him a couple of times via this thread and his website...hopefully he will have time to respond soon...I'm sure he is trying to make big money instead of dealing in the minutiae

 

[SFIV1967]

thanks I have reached out to him a couple of times via this thread and his website...hopefully he will have time to respond soon...I'm sure he is trying to make big money instead of dealing in the minutiae

No, that is not what it is, he runs an instrument repair shop and is usually very busy and usually prefers to be contacted via his website. His prices for vintage and rare to get parts are extremely fair but mind shipping overseas might add a lot as well. Also mind there is holiday time at the moment.

Ralf

 

[FrankMcG]

Ralf
Thanks for letting me know. All good, no worries, I totally understand, I’m not upset…he has been very helpful, as you all have and I appreciate it all!
Eventually I am sure I will get the right part.
All the Best!

 

[beecee]

I think shipping was around $10 or so....his pricing was more than fair.

 

[FrankMcG]

Hello FrankMcG,

Welcome! As Chris already pointed out, there are probably many guitar repairmen that may have the item that you're looking for.
However, there are many different versions that, at first sight, may look alike, but that may not fit your guitar.

From what I've researched I would think that you need the following bushing, but I may be wrong.

Maybe you could wiggle out one of the other bushings, so you can compare the 'knurled' part with the one in the photo.
The diameter of the part that goes into the hole is approximately 11/32".
If you measure something else, just let me know and I will check my drawers.

I can help you out with one of these, but if you can find one a little closer to where you are, I'm in the Netherlands, it might be a little easier.

Sincerely,

Hans Moust
www.guitarsgalore.nl

I only need one so if you can double check the dimensions and let know if you think it is good...I'll buy it let me know how much shipping will be franktmcgough@gmail.com

 

[M-30]

I might have one if you haven't found one already.Let me know.