jaz761
Junior Member
This is an incredible hand-built Round Shoulder Euphonon Style 3 built by Tony Klassen in Indiana. I have always wanted one of these and was lucky enough to find this one. It's an incredible instrument in every way; sound, finish, feel. Adirondack top, Oak back and sides. Two little dings on the top and a few marks on the headstock. About the classiest, most understated guitar you'd ever hope to meet. Big, clear sound with lots of midrange punch and tight bass. Articulate and present in every way. TKL style case is a perfect fit.
I thought this guitar would be appealing on LTG because it's kind of unique. I have sound clips available if there's any interest...
SOLD ELSEWHERE
• Nut width 1 3/4"
• Bridge spacing 2 5/16"
• Fingerboard radius 12"
• 14 fret neck joint
• Scale length 25 1/2"
• Lower bout 16"
• Waist 10"
• Upper bout 11 3/4"
• Body length 19 3/4"
• Depth 3 1/2" to 4"
• Adirondack Spruce top, White Oak back and sides
• Hot hide glue construction
• Multi-layer B/W/B top purfling & multi-layer rosette
• Ivoroid bound back, sides & fingerboard
• Ebony bridge - Ivoroid bridge pins - Bone nut and saddle
• 3-piece laminated Spruce/Rosewood/Spruce top X bracing
• Ebony fretboard with dot mother of pearl inlay
• Ebony peghead overlay - Waverley Vintage style tuners
• Ebony end pin - Gloss nitrocellulose lacquer finish
• Adjustable through sound hole truss rod
• Vintage Larson style tortoise teardrop pickguard
• Hard Shell case
I thought this guitar would be appealing on LTG because it's kind of unique. I have sound clips available if there's any interest...
SOLD ELSEWHERE
• Nut width 1 3/4"
• Bridge spacing 2 5/16"
• Fingerboard radius 12"
• 14 fret neck joint
• Scale length 25 1/2"
• Lower bout 16"
• Waist 10"
• Upper bout 11 3/4"
• Body length 19 3/4"
• Depth 3 1/2" to 4"
• Adirondack Spruce top, White Oak back and sides
• Hot hide glue construction
• Multi-layer B/W/B top purfling & multi-layer rosette
• Ivoroid bound back, sides & fingerboard
• Ebony bridge - Ivoroid bridge pins - Bone nut and saddle
• 3-piece laminated Spruce/Rosewood/Spruce top X bracing
• Ebony fretboard with dot mother of pearl inlay
• Ebony peghead overlay - Waverley Vintage style tuners
• Ebony end pin - Gloss nitrocellulose lacquer finish
• Adjustable through sound hole truss rod
• Vintage Larson style tortoise teardrop pickguard
• Hard Shell case
Last edited: