elasticman
Member
- Joined
- Jul 24, 2010
- Messages
- 177
- Reaction score
- 0
I'm hoping someone can shed some insight. It's been brought to my attention that my '68 F20 may need a neck reset due to the low saddle as seen in these photos.
In the first one, you can see that the high E string is not touching the bridge. There's some room there.
in this next pic, you can see the angle of the saddle straight-on (some had thought it was parallel to the bridge).
What do you think? Neck reset needed? I like the action and it sounds good, but if a reset is in her near future I may move on...
bridge pins are chewed up too, so I want to replace them. Not sure if you need specific ones for an old Guild?
In the first one, you can see that the high E string is not touching the bridge. There's some room there.
in this next pic, you can see the angle of the saddle straight-on (some had thought it was parallel to the bridge).
What do you think? Neck reset needed? I like the action and it sounds good, but if a reset is in her near future I may move on...
bridge pins are chewed up too, so I want to replace them. Not sure if you need specific ones for an old Guild?