Looks like two 500k pots are in there and two red colored .022uf chicklet shaped caps, from what I can see. A third cap is a bumble bee looking tiny one but no values on it I can see. Pickup uses a quick connect.
Yes, two 500k Audio pots. I am not sure both caps are 0.022. The one between tone and volume pot is .02 but the one on the Volume pot is maybe a .002 !
This "third cap Bumble bee looking" is not a cap but a resistor! It is in parallel with the .002 cap on the volume pot as "treble bleed". This mod will help retain the high frequencies that are lost when the volume setting is reduced. By adding the resistor in parallel, a small amount of ALL frequencies are allowed to bypass the volume pot along with the high frequencies that bled through the capacitor. This is done to prevent the tone from becoming too thin in reduced volume settings.
It should be a 100k ohms resistor, the colors of the 4 rings would be Brown, Black, Yellow, Gold.
Now in your photo it looks more like Brown, Black, Orange, Gold ? That would make it only a 1 0 000 = 10kohms +/-5% resistor. 10k ohms would be pretty low for such resistor.
Anyway, just wanted to let you know.
Ralf