txbumper57
Enlightened Member
Ok, On my 2000 Starfire V I have been looking for pickup rings that will screw in place of my Factory Fender HB1 rings so I don't have to drill a Hole in the originals when adding aftermarket Humbuckers. I know this is a problem that a lot of people have been having with the late 90's early 2000's Guitars. It just seems easier to drill a 3rd hole and not worry about it. The problem with that is you can't return the rings to original if you decide to sell it later on. I went to my local shop today and found a set that fit perfectly. They have the same tilt, Height, and Mounting hole pattern with one adjustment hole on each side. I will be installing these along with a set of Seymour Duncan Phat Staple pickups in the next few days. Already did a test fit on the rings tonight and they fit like a glove.:rugby:
For the Record Here is the Company name Phone and Part#. The rings cost $6.00 for the set from the local store and you can probably buy them online even cheaper.
ALLPARTS
Houston, Texas USA
Phone#713-466-6414
Part#PC 0743-023 Black Humbucking Pickup Rings
These hold standard Humbuckers and Fit the Starfire IV-V models equipped with Fender HB1's
I'll update as soon as the phat staples arrive.:tongue-new:
For the Record Here is the Company name Phone and Part#. The rings cost $6.00 for the set from the local store and you can probably buy them online even cheaper.
ALLPARTS
Houston, Texas USA
Phone#713-466-6414
Part#PC 0743-023 Black Humbucking Pickup Rings
These hold standard Humbuckers and Fit the Starfire IV-V models equipped with Fender HB1's
I'll update as soon as the phat staples arrive.:tongue-new: