Wait, what? What mounting screws?I just pulled out the Detonator got from acornhouse and found that both mounting screws had been shoved forward. I had to pull the screws out and superglue the cracked area down. If you ship these, make sure the guitar can't slide in the case where the headstock can hit the top.
Are you talking about the neck bolts/screws that mount the neck to the guitar body?I just pulled out the Detonator got from acornhouse and found that both mounting screws had been shoved forward. I had to pull the screws out and superglue the cracked area down. If you ship these, make sure the guitar can't slide in the case where the headstock can hit the top.
Looks like a Kahler Spyder.Which vibrato is that? It looks similar to the one on the Liberator, but has fine tuners.
Yes it is a Kahler. The fine tuners are in a horrible location as any time you attempt to palm mute you hit the tuners and knock it out of tune! My buddy had a Flyer and after tuning up he would stick a length of painters tape over the tuners to keep them in place.Which vibrato is that? It looks similar to the one on the Liberator, but has fine tuners.