Quick question re: Bisonics

[Default]

Is the chrome surround conductive? I'm working on making a replacement mount and there is a wire leading from the ground lug into the rubbery glue they used to mount the pup. I could then laminate aluminum sheet between layers of abs and solve both durability and shielding issues. Actually, that's exactly what I am going to do.
Would still like to know if it's conductive though. I could also use screw spacing and distance from the edge of the mount, as I do not have that information.

 

[lungimsam]

For 2013 FMIC Bisonic:
Chrome ring:
Yes conductive.
83mm long side.
58mm short side.
Holes are 2.25 mm from outside edge.
Plastic ring:
No conductive.
6mm from hole centers to outside side edges
All are measured from the center of screw holes to outer edge.

If you want I can send you my mounting plates. Don’t know why I didn’t think to do that in the first place.

 

[Default]

Thanks much! That is very helpful!

 

[lungimsam]

Double check my post because I just edited it.

 

[lungimsam]

PS- I don’t think it is chromed. I think it is a nickel finish. It is duller than chrome and it gets foggy like nickel parts do.

 

[Default]

They seem to have nickle plated most everything.