jedzep
Senior Member
Hi y'all.
The front wall of the saddle slot on my already once repaired/glued bridge is acting up, leaning again from string break angle pressure forward. A hard to find part, if I must, even with Hans' help, so I ask here if anyone has a recommendation for someone they might have used who can turn a BRW blank into a facsimile of an early Guild flattop bridge. Crazier yet, would you consider buying the Guild USA M20 version, fill in the pin holes, then re-drill to 2 1/8" spacing, as an option. Suggestions are welcome.
Thanks...Dave
The front wall of the saddle slot on my already once repaired/glued bridge is acting up, leaning again from string break angle pressure forward. A hard to find part, if I must, even with Hans' help, so I ask here if anyone has a recommendation for someone they might have used who can turn a BRW blank into a facsimile of an early Guild flattop bridge. Crazier yet, would you consider buying the Guild USA M20 version, fill in the pin holes, then re-drill to 2 1/8" spacing, as an option. Suggestions are welcome.
Thanks...Dave
Last edited: