A Warning About A Particular Guitar Stand

West R Lee

Venerated Member
Joined
Nov 19, 2005
Messages
17,773
Reaction score
2,714
Location
East Texas
I've posted this in Ebay/Craigslist/Gbase in a thread about a Peregrine, but thought it was useful for everyone, so I thought I'd stick it here.

The Peregrinefeatured in the thread is a beautiful one, a bit overpriced, but very pretty and unique. In that listing, the seller shows a picture of a rather large blemish on the back, but states he thinks it will "it will PROBABLY buff out". I don't think so and I'll tell you why.

I picked up 3 of these stands made by an outfit called Stagg Music at the Arlington Guitar Show one year. When I got them home, I placed my DV72 in one of them. The next day I noticed a scuff on the back and thought I'd bumped something. I got a soft cloth and buffed it out, but it was a minute scuff. Not thinking much about it, I stuck her in the same stand, next day....same thing. This time it was a little harder to buff. That mark on the DV72 was occurring in the same spot as the large one on the Peregrine.

There is something in the rubber pad that supports the back of the guitar that reacts to nitrocellulose. In fact, I remember thinking how glad I was that I hadn't left it in the stand for a week. If I'd have done that, the reaction would have gone right through the nitro. I think that's what's happened to the Peregrine.

You guys just beware of these stands, they're fine as long as you put a cotton cloth between the rubber back support and the guitar. I'd just hate to see any of you with a rude awakening on your favorite guitar.

000_0195.jpg


Here's the back of the Peregrine, now listed on eBay. If this scuff was created by this stand, it ain't buffin out of there....it's through the finish. I've never understood why guys that sell guitars state "it will buff out"? If it's such an easy fix, sometimes it is, sometimes it isn't, why don't they just do it and not mention it in their listing? The plastic ends on the feet look a tad different on his stand, but I'd bet a paycheck it's the same stand.

BackScuff.jpg


West
 

AlohaJoe

Senior Member
Joined
May 13, 2008
Messages
2,967
Reaction score
2
Location
Ecotopia
West R Lee said:
I've never understood why guys that sell guitars state "it will buff out"? If it's such an easy fix, sometimes it is, sometimes it isn't, why don't they just do it and not mention it in their listing? West
That's a great question West... When I see "it'll buff out", "it's an easy fix" or this or that part "is easy to find" I figure it's a sure sign that it's impossible to fix, needs a complete refinish and the part is made out of unobtainium! :lol:
 

Brad Little

Senior Member
Gold Supporting
Joined
Dec 19, 2008
Messages
4,637
Reaction score
2,044
Location
Connecticut
I had a problem with a different stand, the wooden one from Taylor. It put dents in the lower bout of my D-50, apparently from where it hit the two supports. Made a near mint guitar into a well used one in a short time.
Brad
 

West R Lee

Venerated Member
Joined
Nov 19, 2005
Messages
17,773
Reaction score
2,714
Location
East Texas
Brad Little said:
I had a problem with a different stand, the wooden one from Taylor. It put dents in the lower bout of my D-50, apparently from where it hit the two supports. Made a near mint guitar into a well used one in a short time.
Brad

Ouch!

West
 

dapmdave

Enlightened Member
Joined
Mar 18, 2009
Messages
7,612
Reaction score
24
Thanks for posting this, West. I see these around here a lot, but luckily I haven't bought one.

Dave :D
 

Guild Dawg

Member
Joined
Sep 3, 2007
Messages
177
Reaction score
5
Location
Georgia, US
Guild Total
1
I remember at one time the older guitar stands (the ones with the metal U-shaped brackets at botton and top) were sheathed in surgical rubber tubing to protect the guitar from being scratched by the metal and to keep it from slipping out of the stand. Then people figured out the tubing ate away at the guitar's finish. :x :roll: :cry:
 

chazmo

Super Moderator
Gold Supporting
Joined
Nov 7, 2007
Messages
26,499
Reaction score
7,851
Location
Central Massachusetts
Ouch in all cases.

Felt padding or the kind of foam the Hercules stands use. That's it. Rubber/latex.... ouch! I'm still astonished that some guitars stores keep those latex-covered hooks around. They're just causing damage.
 

chazmo

Super Moderator
Gold Supporting
Joined
Nov 7, 2007
Messages
26,499
Reaction score
7,851
Location
Central Massachusetts
twocorgis said:
Hercules guitar stands are the only ones I'll use any more. I first found out about them at LMG, and I've been using them ever since. A truly superior design. 8)

Yup.

Or, you can have custom wooden ones made for you too. :) :)

The Hercules stands are my standard. Not that I perform a lot, but they're the only ones I'd use on stage.

The one thing I find with my jumbos, though, is it's a little tricky getting them into the hook on my Hercules stands.
 

twocorgis

Venerated Member
Gold Supporting
Joined
Jan 8, 2010
Messages
14,167
Reaction score
6,813
Location
Lawn Guyland
Guild Total
18
Default said:
Are these stands that were at New Hartford? The autograb stands?

Just curious, I'm going over to get a case this afternoon and I need a stand too.

The stands at New Hartford were the GS414Bs if I'm not mistaken. I've got three of them now and love them.
 
Top