adorshki
Reverential Member
The good news is that CMG only has to look towards El Cajon to know how to make it happen.
Oh. You said El Cajon.
Sorry, my bad.
The good news is that CMG only has to look towards El Cajon to know how to make it happen.
OH I'll be happy if they just confirm they still have the body bucks and plans to use 'em.
Otherwise, my "pipe dream" custom order would be F40 w/ arched rosewood back ; 24-3/4 scale full 2-octave neck with 1-11/16 nut; closed tuners. The nut width is critical, for me, it's that width on the 24-3/4" neck that's so hard to find, on a full-depth F40 body.
Heck even a 24-7/8" or 25" scale'd probably work, just looking for something a little bit easier on my stretching hand than the 3 I have now.
I'm not real fussy about "bling" like block inlays, G-shield, etc.
But if they contemplate positioning it where the F40 used to reside, right next to the F50; then bling certainly isn't a turn-off to me.
Maybe another way of looking at it would be a revival of the F47Rce except for the scale/nut width.
I'd probably be flexible about whether the back was arched too, with rosewood.
That was my previous pipe dream before I decided I want that 16" bout. (F30s're only 15" give or take, and shallower)I would think an F30, with a 24 3/4" fretboard could be possible in the near future.
Ralph
Not until I'm ready to spend money.I think it's high time Oxnard throws open its doors to us, don't you guys?