T1 RVT power tranny - need either a source or the secondary voltages for a hunt

Still working on the T1 RVT, seems like the power tranny is bad - only the secondary for the high voltage is working - one leg of the heaters is dead and I only have 7 volts on the brown lead (reverb circuit). I need to ask if someone can conform the correct voltages on the secondaries - the schematic is a little tough to read. Looks like 350V, 64V, and I'm assuming 6.3V. I am hoping for either a source for the tranny (been looking, not much success yet), or confirmation of the voltages so I can hunt a little further afield with various tranny sources. Thanks in advance for any info.

Buy a 6.3 volt filament transformer and disconnect the heater leads from the stock transformer.